Closing The Charging Station; Operation; General Information On Operation - Mennekes AMTRON Xtra E Instructions D'installation

6.6 Closing the charging station

Fig. 31: Closing the charging station
Caution
Damage to the device.
Damage to the device by improper handling.
Do not use the brass bolts for attaching the front panel as
transport support or handle.
Closing the charging station
1. Fold up the front panel
the screws 2 .
2. Fit the front enclosure part
4 (M5 x 35) and 5
When delivered, the front enclosure part is not attached
with screws. The screws
enclosed accessory bag.
After the installation of the charging station, the
enclosure screws on the back of the charging station
can be reached only with a shortened Allen key. The
supplied Allen key can be used.
Wechs el ein- auf z weis paltig
29
. Secure the front panel with
1
3 and secure with screws
(M5 x 16).
4 und 5 are stored in the

7 Operation

7.1 General information on operation

Operating the charging station depends on the selected
operating mode.
 See Chapter 7.4 "Description of operating modes" on
page 32.
All information on the status of your charging station is
displaced at a glance on your smart phone or tablet.
Operating with Charge APP
The operation with Charge APP is largely self-explanatory.
Fig. 32: Charge APP (example)
The Charge APP informs you during the charging process on
the amount of energy that has already been charged.
You can start, pause and terminate the charging process
manually with the APP and choose from three different
charging modes to optimise energy costs.