3.2 Intended use
The protective roof is intended exclusively for protection of
the device against the effects of the weather.
The protective roof is intended exclusively for wall mounting
and can be used indoors and outdoors.
MENNEKES Elektrotechnik GmbH & Co. KG accepts no lia-
bility for any consequences arising from improper use of the
device. Read these installation instructions carefully before
using the protective roof and observe them at all times.
No liability is assumed for damage or defects, if
– The protective rood is not used for its intended purpose.
– The safety instructions are not observed.
– The instructions concerning possible misuse are not obser-
ved.
– The design of the protective roof is modified.
Keep these installation instructions together with the device
operating manual and pass these on to a possible new
owner.
3.3 Qualified electrician
A person who, based on his or her professional education,
know-how and experience, as well as knowledge of perti-
nent regulations, can assess the work assigned to him or
her and identify possible hazards.
(DGUV Regulation 3; DIN VDE 0105-100).
The qualified electrician must meet and observe the follow-
ing requirements:
– Presence of suitable technical training with in-depth elec-
trical engineering expertise.
– Strict observance of the installation instructions.
– Intended use of the protective roof.
– Knowledge and application of relevant electrical enginee-
ring regulations and the local regulations for the installati-
on of electro-technical equipment.
– Knowledge and application of the current regulations and
provisions concerning occupational health & safety and
safety technology.
– Ability to recognize risks and avoid possible hazards.
4. Possible misuse
Any use other than that defined under "Intended use" or
going beyond the intended use of the device is considered
non-intended use.
The following forms of possible misuse must be avoided
and the instructions for their avoidance observed.
Misuse: Failure to observe the installation instructions
Preventive measure:
• Read these installation instructions carefully before using
the protective roof.
• Observe the installation instructions during all work.
• Carry out only the work described in these installation
instructions.
Misuse: Manipulation of the protective roof
Preventive measure:
• Do not make changes or modifications to the protective
roof.
5. Remove the charging
station
If the optional protective roof is to be installed on a char-
ging station at a later date, the device already installed must
first be removed again.
If the charging station is installed at the same time as the
protective roof, the protective roof is installed first.
Lack of technical expertise – life-threatening danger
due to electric shock!
• Only perform installation/removal work on the device
and on electrical equipment if you have received
recognized training as a qualified electrician and have
the required capabilities and know-how.
DANGER
EN
EN
EN
EN
NL
NL
FR
FR
IT
IT
3