Closing The Charging Station; Operation; Charing Cable Storage - Mennekes AMTRON Start Instructions D'installation

6.3 Closing the charging station

Fig. 16: Closing the charging station
Caution
Damage to the device.
Damage to the device by improper handling.
Do not use the brass bolts for attaching the front panel as
transport support or handle.
Closing the charging station
1. Fold up the front panel
the screws 2 .
2. Fit the front enclosure part
4 (M5 x 35) and 5
When delivered, the front enclosure part is not attached
with screws. The screws
enclosed accessory bag.
After the installation of the charging station, the
enclosure screws on the back of the charging station can
be reached only with a shortened Allen key. The supplied
Allen key can be used.
17
. Secure the front panel with
1
3 and secure with screws
(M5 x 16).
4 und 5 are stored in the

7 Operation

Warning
Risk of injury
There is a risk of injury due to damage to the charging
system.
If it appears that the charging system cannot be operated
safely:
 Take the charging system out of service.
 Determine and eliminate any faults / malfunctions.
 See Chapter 9 "Troubleshooting" on page 22 .

7.1 Charing cable storage

Fig. 17: Integrated charging cable storage
The design of the enclosure