Mennekes Charge App; Requirements; Automatic Connection Of The Charge App - Mennekes AMTRON Xtra E Instructions D'installation

Deleting an RFID card
1. Enter the UID of the RFID card to be deleted into the
field "UID".
2. Enter the PIN 2 (whitelist PIN, see set-up data sheet) of
the charging station in the field "PIN".
3. Click on the button "Delete" to delete the RFID card.
 The RFID card has been deleted from the internal
database (whitelist).
Menu "Software Update"
Fig. 26: Menu "Software Update"
Use the menu "Software Update" to update the operating
software of the charging station.
Proceed as follows to update the operating software of your
charging station.
The current operating software can be found in our service
area under www.AMTRON.info
1. Enter the address www.AMTRON.info into the address
bar of your Internet browser.
2. Enter the serial number of your charging station in the
input field "Access".
3. Select Software Update in the "Download" section.
4. Download and save the current software (e.g.
HC3Application_R2_1_05_421.bin).
5. Call up the service interface of your charging station.
6. Select the submenu "Software Update" in the main
menu.
7. Select the previously downloaded software
8. Click on the button Upload" to update the software
9. Follow the instructions
If the software update is interrupted prematurely (e.g.
due to power failure or transmission error), the charging
station must be restarted (e.g. by clicking the button
"Reset" in the menu "Customer Settings") before a
new update can be attempted.

6.4 MENNEKES Charge APP

6.4.1 Requirements

The following requirement must be met to connect the
Charge APP to the charging station.
 Installation of the Charge APP on a mobile device (smart
phone, tablet). The MENNEKES Charge APP is available
free of charge in Apple App Store, Google Play store
and BlackBerry World.
 Integration of the charging station in the home network
over LAN / WLAN. The customer's WLAN must be
available at the location of the charging station!
 The charging station is turned on and operational.
 The smart phone / tablet must have access to the home
network (WLAN) or to the WLAN provided by the
charging station.

6.4.2 Automatic connection of the Charge APP

Fig. 27: Start menu
1. Open Charge APP.
2. Tap on "search for Wallbox" to search for charging
stations available on your network.
3. Select the desired charging station by the serial number
(SNR, see set-up data sheet).
26