Cleaning Your Breastpump Bag - Medela Pump In Style Advanced Mode D'emploi

1. Cleaning (cont.)
Note
• Make sure faceplate and diaphragm are
completely dry before reseating.
• The faceplate must be seated correctly
and snapped together at all connection
points. This ensures the pump will
have adequate vacuum and optimum
performance.
14
1.4 Tubing and faceplate
cleaning (cont.)
7
Snap off the faceplate using the
thumb tab.
10
Locate the 3 connection points
on the reverse side of the
faceplate and on the pump.
8
• Soak in warm soapy water for
5 minutes.
• Clean with a clean dish-cloth or
soft brush
• Rinse parts with clear water.
• Allow to air dry in a clean area.
11
Align connection points and hold
back of pump with one hand while
pushing on the faceplate until it
snaps into place.
Questions? Visit www.medela.com or call us at 1-800-435-8316.
9
• Wipe diaphragm with a clean (no soap),
damp cloth.
• Allow to air dry in a clean area.
1.5 Cleaning your
breastpump bag
Use a damp (not wet) cloth to
wipe the breastpump bag after
each use.
15