Description Of The Product; Elements Of The Complete Installation; Electrical Wiring - Erreka VIVO-M203 Manuel De L'installateur

DESCRIPTION OF THE PRODUCT

1

ELEMENTS OF THE COMPLETE INSTALLATION

1 Operator 1 (VULCAN)
2 Operator 2 (VULCAN)
3 Flashing light with antenna
4 Leaf 1
5 Leaf 2
6 Exterior photocells
7 Key switch (key device)
8 Wall button (key device)
9 Control board
10 Connections box
11 Underground electrical installation
12 Interior photocells
13 Electrolock
14 External closing stopper
15 Opening stopper
16 Traffic light

ELECTRICAL WIRING:

Element
A: Main power supply
B/F: Flashing light / antenna
C: Photocell (Tx / Rx)
D: Pushbutton or key switch
E: Operator (motor / encoder)
Fig. 1 Elements of the complete installation

The safe and correct operation of the
installation is the responsibility of the installer.

The closing (14) and opening (15) limit switches are
essential .

The photocells (6) and (12) provide additional safety
to that already provided by the control board. For
greater safety, Erreka recommends installing the
photocells (6) and (12).
Nº wires x section
2
3x1.5mm
2
2x0.5mm / coaxial cable 50
2 2
2x0.5mm / 4x0.5mm
2
2x0.5mm
2 2
4x0.75mm / 3x0.5mm

The installation starts up using the push button (8)
or key switch (7), or using the radio transmitter.
Maximum length
30 m
k
(RG-58/U) 10 m
30 m
25 m
20 m
Control board VIVO-M203(M)
English
E239B
63