Adjusting The Pulse Flow Setting - Invacare Platinum Mobile Manuel D'utilisateur

The pulse flow setting and pulse icon are not shown
when alarm text is displayed on screen.
Informational Text
Informational text is shown on the display screen during
certain periods of concentrator operation:
• "Warming Up" — displayed while the concentrator is
warming up after first being turned on.
• "Powering Down" — displayed while the concentrator
is powering down after being turned off.
Alarm Text
If an alarm condition exists, text describing the alarm will be
shown on the display screen.
Refer to Alarm Conditions in Troubleshooting for more detail
on alarm conditions and related alarm text.
1187376-C

4.9 Adjusting the Pulse Flow Setting

CAUTION!
Risk of Minor Injury or Discomfort
It is very important to select the prescribed
oxygen flow setting. This will ensure you will
receive the therapeutic amount of oxygen
according to your medical condition:
– DO NOT increase or decrease the flow setting
unless a change has been prescribed by your
physician or therapist.
– The therapeutic effectiveness of the prescribed
oxygen flow setting should be periodically
reassessed.
– Use only the length of cannula that was used to
determine the prescribed oxygen flow setting.
– The pulse flow settings of this concentrator
might not correspond to continuous flow
oxygen.
– The settings of other models or brands of
oxygen therapy equipment do not correspond
to the settings of this concentrator.
Usage
37