Invacare Platinum Mobile Manuel D'utilisateur page 7

1. Open the battery compartment door. With battery
fuel gauge label facing toward the front of the oxygen
concentrator, slowly lower battery A straight down into
one of the two slots in the battery compartment.
Refer to Installing the Battery(s) in Setup.
2. Connect the AC Power Adapter to the external power
input connector B. Plug the AC cord into the electrical
outlet.
Refer to External AC Power in Setup.
Using the concentrator for the first time requires
the battery(s) to be charged. Refer to Charging
the Battery(s) in Setup.
3. Connect the nasal cannula to the concentrator oxygen
outlet port on your concentrator C. Oxygen will only
be delivered while you are breathing through the nasal
cannula connected to this device.
Refer to Connecting/Positioning the Nasal Cannula in
Setup.
1187376-C
General
7