Installing The Wood Chips Box; Mounting The Drawer Handles; Installing The Drawers Into The Cabinet Assembly - Pit Boss PBMEMUU001 Instructions D'assemblage Et D'utilisation

7. INSTALLING THE WOOD CHIPS BOX

Parts Required :
1 x Wood Chip Box Assembly (#51)
1 x Lower Cabinet Assembly (#46)
Installation :
• Slide Wood Chip Box Assembly onto the Wood Chip
Box support rails of Lower Cabinet Assembly.
See Fig. 7.
Note: When removing the Wood Chip Box from the
smoker, lift up on the handle and pull out the Wood
Chip Box.

8. MOUNTING THE DRAWER HANDLES

Parts Required :
2 x Drawer Handles (#49)
Drawer Handle Standoffs (#48)
4 x
Drawers (#47)
2 x
4 x M6x10 mm Screws (#D)
Installation :
• Mount one Drawer Handle and two Drawer Handle
Standoff to the Drawer.
Use: 2 x M6x10 mm Screws
See Fig. 8.
• Repeat the same step for other drawer.
9. INSTALLING THE DRAWERS INTO THE
CABINET ASSEMBLY
Parts Required :
Drawer Assembly (#47, #48, & #49)
2 x
Lower Cabinet Assembly (#46)
1 x
Installation :
• Slide Drawer Assembly into the Lower
Cabinet Assembly.
See Fig. 9.
FIG. 7
46
51
FIG. 8
47
D
49
48.1
FIG. 9
D
48.2
13