Assembly Preparation; Assembly Instructions; Mounting The Left Front Support Leg - Pit Boss PBMEMUU001 Instructions D'assemblage Et D'utilisation

Parts are located throughout the shipping carton, including underneath the grill. Inspect the grill, parts, and hardware blister
pack after removing from the protective shipping carton. Discard all packaging materials from inside and outside of the grill
before assembly, then review and inspect all parts by referencing the parts list. If any part is missing or damaged, do not attempt
to assemble. Shipping damage is not covered under warranty. Contact your dealer or Pit Boss
through Sunday, 4am - 8pm PST (EN/FR/ES/DE).
service@pitboss-grills.com | Toll-Free: 1-877-303-3134 | Toll-Free Fax: 1-877-303-3135
IMPORTANT: To ease installation and avoid injury, use two people when assembling this appliance.
Tools required for assembly: screwdriver and wrench. A wrench for the wheels is included.
IMPORTANT: It is advised to read each step entirely before starting assembly on instructions. Do not tighten screws
completely until all screws for that step have been installed.

1. MOUNTING THE LEFT FRONT SUPPORT LEG

Parts Required :
1 x Lower Cabinet Assembly (#46)
1 x Left Front Support Leg (#44)
M6x60 mm Screws (#C)
2 x
M4x10 mm Screw (#F)
1 x
Installation :
• Place a piece of cardboard on the floor to prevent
scratching the unit.
• Mount Left Front Support Leg to the Lower
Cabinet Assembly.
Use: 2 x M6x60 mm Screws and 1 x M4x10 mm Screw
See Fig. 1.
10

ASSEMBLY PREPARATION

ASSEMBLY INSTRUCTIONS

FIG. 1
C
Customer Service for parts: Monday
®
46
44
F