Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
16. INSTALLING THE SMOKER DOOR
Parts Required :
Smoker Door (#40)
1
x
Lower Cabinet Assembly (#46)
1
x
8
x
M4x8 mm White Zn Screws (#G)
Installation :
•
Mount Smoker Door with Hinge assembly to Lower
Cabinet Assembly.
Use: 8 x M4x8 mm Screws
See Fig. 16.
17. PREPARING THE GRILL ASSEMBLY
FOR INSTALLATION
Parts Required :
1
x
Gas and Charcoal Cabinet with Lids Assembly (#13)
1
x
Cart Assembly
Installation :
•
Carefully put the main chamber on the top of the smoker
body and then remove the twist tie. Pull out the smoker
electric wires and smoker temperature wire/sensor
from the back side of Control panel first, then place the
temperature wire and sensor toward front.
See Fig. 17.1. and Fig. 17.2.
ATTENTION: Do not pinch or sandwich the electric wires
and/or temperature wire sensor during the assembly.
16
FIG. 16
46
G
G
FIG. 17.1
FIG. 17.2
TWIST TIE
TEMPERATURE
SENSOR
40
13
CART
ASSEMBLY
ELECTRIC
WIRES
Publicité
Chapitres
Table des Matières
