Securing The Lid Stopper; Installing The Lid Handle; Installing The Spice Box, Bottle Opener - Pit Boss Sportsman PB0500SP Guide De Montage

4. SECURING THE LID STOPPER

Parts Required:
1 x Lid Stopper (#5)
Installation:
• Secure the Lid Stopper onto the top of the Main Barrel using the
pre-installed screw on top of the Main Barrel.

5. INSTALLING THE LID HANDLE

Parts Required:
2 x Lid Handle Bezel (#14)
1 x Lid Handle (#15)
Installation:
• Remove the pre-installed screws from the Lid Handle. From inside the
barrel lid, insert one screw to protrude to the outside. Add a Lid Handle
Bezel on the screw, then hand-tighten the screw (from the inside) into the
Lid Handle. Repeat the same installation for the other end of Lid Handle.

6. INSTALLING THE SPICE BOX, BOTTLE OPENER

Parts Required:
1 x Spice Box (#7)
1 x Bottle Opener (#6)
2 x Screw (#D)
Installation:
• Align and place the Spice Box onto the bottom two screws on the side of
the Hopper, below the hopper handle. Push down into place, then install
two top screws to secure the Spice Box onto the Hopper.
• Remove the two pre-mounted screws for the Bottle Opener on the side
of the Hopper, above the hopper handle. Install the Bottle Opener in the
same location using the two screws previously removed.
4
5
15
14
6
7
Secure the lid stopper onto th
top of the main barrel using th
pre-installed screw on the top
of the main barrel.
Remove the pre-installed screws f
handle. From inside the barrel l
one screw to protrude to the outs
bezel on the screw, then hand-ti
screw (from the inside) into
handle.Repeat same installation
Hang the spice box on th
that has been preinsta
5
14
6
D*2
end of lid handle.
8