Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
6
INSTALLING THE SIM CARD
Insert your SIM card into the compartment provided for this purpose
in your SPYPOINT LIVE-3G camera. The SIM card compartment
is located under the batteries. You need to use a Phillips screwdriver
to open and close the compartment.
1. Unscrew the cover screw using a Phillips screwdriver.
2. Slide the metal bracket in the OPEN position.
3. Lift up the metal bracket.
4. Insert the SIM card as indicated.
5. Lower the metal bracket and slide it to the LOCK position .
6. Close the compartment cover.
POWER SUPPLY
The battery level is shown in the upper left corner of the screen
when the camera is in "Test" mode. When a single line remains, the
camera will continue to take pictures but we strongly recommend
changing the batteries before they are empty (see figure below).
AA BATTERIES
This camera requires the use of 8 AA batteries (1.5V). The use of
alkaline or lithium batteries is strongly recommended. Also note
that the voltage of rechargeable AA batteries (1.2V) is insufficient
to power this camera. During the installation of AA batteries, place
the switch inside the battery case to "ALK" (i.e. alkaline). Insert
the batteries in the camera as indicated. Exact polarity must be
followed. We also recommend the use of new batteries to ensure
maximum performance of your camera.
LITHIUM BATTERY PACK
The camera can be powered by a rechargeable lithium battery
pack LIT-09/LIT-C-8 (sold separately, see "Options"). This type of
battery is less affected by cold temperatures and lasts up to 3 times
longer than alkaline batteries. During the installation of lithium
batteries, place the switch inside the battery case to "LIT-09". Insert
the batteries in the camera as indicated (see figure below).
RESET
ALK
LIT-09
7
Publicité
Table des Matières
