Settings Menu - Spypoint LIVE-3G Manuel D'utilisation

12

SETTINGS MENU

Allows the user to set the advanced settings of the camera. To
configure the system in another language, press the "
until the option "Language" is highlighted. Press "OK" and modify
▲
the selection with " " or "
pressing "OK". The system will change all the menus in the selected
language.
Navigating the menu::
• « ▲ » and « ▼ » button to change settings
◄ ►
• « » and « » button to change pages
When selected, some options affect the behaviour of other
options from the list of the settings menu. In this case, the
selected option is displayed in yellow and options affected are
shown in gray.
Set the date as Year/Month/Day
Date:
Set the time as Hour/Minute/Second
Time:
Note: The seconds are not printed on the pictures
when "Stamp" option is activated.
Allows the user to choose between a 12 or
Time format:
(12h/24h)
24 hours period time displays on the photos.
(eg. 6:00 pm or 18:00)
Date and Time are synchronized with the cellular
Auto time:
(Yes/No)
network when available.
▼
" button
▼
" button. Confirm the choice by
Sets the time interval to wait between each
Delay:
(10s/1min/3min/
detection before the camera records the next
5min/10min/
photo or video.
15min/30min)
Additional setting: it is possible to decrease the
delay between detections to 10 seconds (instead
of 1 minute) by using the following procedure.
Note that the battery life will be affected.
Turn OFF the camera. Press and hold the "
button and turn the camera ON . "10sec enabled"
appears on the screen meaning the minimum
delay is now 10 seconds. To reset the camera to 1
minute delay, follow the same procedure. "10sec
disabled" appears on the screen (see figure
below)
10s enabled
10 sec delay
Sets the recording time of video in "VIDEO"
Video length:
(10s/30s/60s/90s)
mode.
Allows the camera to take several consecutive
Multi-shot:
(1/2/3/4/5/6
shots at each detection with a 10 second delay
consecutive shots)
between each photo.
13
▲ "
10s disabled
1 min delay