Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
10
SETTINGS
Sets the advanced options of the camera
(see "Settings Menu" for details).
TEST
Allows the user to test the detection system of the camera. When the
"Test" mode is selected, no photo or video is recorded. Pass in front
of the camera from left to right. When the camera detects motion,
the test light blinks to indicate that the camera would normally have
saved a photo or video. If the system does not detect movement,
increase the detection range using the option "Sensitivity" in the
Settings menu ("Low", "Medium" or "High"). Realign the system
if necessary. (Recommanded installation height: about 3 feet).
1.
2.
4.
In "Test" mode, it is possible to take a picture by pressing the
"OK" button. The photo is saved and appears in "View" mode.
The "Test" mode also provides information on:
1. The battery level
2. The cellular signal strength
3. The used space on the memory card (as a percentage)
4. The GPS coordinates of the camera
VIEW
Allows the user to view photos or videos on the built-in 3.5" screen
of the camera or on a TV set.
With 3.5" built-in screen:
When "View" mode is selected, the last recorded image or video
automatically appears on the screen. Press the "
to view the next or previous file. Press "OK" to see the different
options available:
Play/Pause:
Delete:
Delete all:
3.
Format:
With a TV set:
Allows the user to view photos and videos directly on a TV set.
Turn on the camera and plug the yellow end of the composite video
cable supplied with the camera to "VIDEO IN" input of the TV set
and the other end into the "TV OUT" output of the camera. The
last picture or video recorded appears on the screen. To change the
photos or videos, use the "
the same as when viewing on the built-in screen of the camera (see
above).
◄
Plays or pauses the video on the screen. (This
option is available only for videos)
Deletes the photo or video displayed on the screen.
Deletes all photos and videos that were not
protected.
Deletes the entire contents of the memory card,
including protected files.
Note: Press the "▲" to enlarge the image on the
screen or "▼" to return to the original size. When
the image is enlarged, use the navigation buttons to
adjust the position of the image.
◄
►
" and "
" button. The options are
11
►
" or "
" button
Publicité
Table des Matières
