Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
18
Defines at what time of day the camera
Synchronize
communicates
at:
server in order to update its status or
to
send
(Over a period of 24 hours)
e.g.1: The option "Synchronize at" is set to 8:00
and the option "Synchronize" is set to 6/day.
The camera performs 6 synchronisations per day
and begins its first transfer at 4h, then at 8h, 12h,
16h, 20h and 24h.
e.g.2: The option "Synchronize at" is set to 13:00
and the option "Synchronize" is set to 2/day.
The camera performs 2 synchronisations per day
and begins its first transfer at 1h, then at 13h.
Sets the photo size sent to the
Transmit
user's account.
format:
(Thumbnails/
Large)
Thumbnails: 160x120 pixels
Large: 640x480 pixels
Note: It is recommended to use the format
"Thumbnails", since many more photos can be
sent on the
in that format and thus, reduce the amount of
cellular data transmitted. The user can still, from
his account, choose among his "Thumbnails"
format photos which ones he wants to receive in
"Large" format in the next synchronisation of the
camera.
Note: If the camera is configured with the power
option "Electricity", the selected photos will be
transferred in "Large" format into a maximum
delay of 10 minutes after ordering.
Sets the detection sensitivity of the camera.
Sensitivity:
(Low/Medium/
High)
Note: The system detects only heat sources in
motion. So it is important during installation to
avoid as much as possible, objects obstructing
the camera . This prevents the camera from being
triggered because of the sun reflecting on these
objects. (e.g. a tree branch)
with
the
mySPYPOINT
photos
on
the
user's
account.
mySPYPOINT
mySPYPOINT
user's account
Allows the user to select the type of power supply.
Power:
(Batteries/
Electricity)
Choose "Electricity" if the camera is powered
of a main electric supply. (using a 12 volt DC
adapter AD-12V, sold separately). Main electric
supply is recommended for security purposes. It
provides an instant trigger time when a movement
is detected. We recommend that you remove the
AA batteries when this power supply is used.
Although, lithium battery pack can remain safely
inside the camera and it is ideal in case of a
blackout. A 12 volt DC adapter that can provide a
minimum of 800 mA is required
(See "Options" for accessories).
When the option "Electricity" is enabled:
• The option "Delay" is reduced and locked to 2
seconds to speed up the photo shooting.
• The "Multi-shot" speed is improved with a 2
seconds delay between each take.
• The option "Time Lapse" is disabled
• The option "Synchronize" is locked on
"Permanent"
pictures immediately after recording.
• The option "Synchronize at" is ignored.
• If the option "Multi-shot" is enabled, the
transmission is performed once the series of
photos is recorded.
• The camera is synchronized with the server
every 10 min. and uses an average of 1.4Mb of
data per day excluding the weight of pictures
transmitted during this period.
• The viewing screen may light up momentarily
during synchronizations.
Allows the camera to operate in continuous
Continuous:
(Yes/No)
mode. When there is no more space available on
the memory card to record photo or video, the
camera continues to record by erasing the oldest
files and by replacing them with newest ones.
to allow the transmission of
19
Publicité
Table des Matières
