Verlinde STAGEMAKER SL5 504 M2 A D8+ Manuel Du Propriétaire page 85

5. Measure the depth of the gap in the brake check hole with a caliper.
6. Compare the measured brake wear value with the maximum allowed value for brake wear.
You can find the maximum value for the brake wear in the brake data sticker on the brake.
The brake wear value varies according to the brake manufacturer and brake series.
For each brake type, the maximum value for the wear is indicated on the brake data
REMARQU
sticker on the brake.
E
Do not exceed the maximum value for the brake wear.
7. If the brake has worn more than the maximum allowed criteria, replace the brake.
8. Check the secondary brake.
If the hoist has a double brake, the brake assembly includes also a secondary brake. The
secondary brake (2) is the brake that is on the top in the double brake assembly.
The secondary brake is a holding brake that works as a back-up brake for the main brake
(1). The secondary brake is the functional brake only, if the main brake is damaged and not
able to hold the load.
Le présent document et les informations qu'il contient sont la propriété exclusive de Verlinde S.A.S. Lesdites
informations sont considérées comme privées, confidentielles et appartenant à leur propriétaire et ne peuvent ni être
reproduites, divulguées auprès de tiers, ni modifiées ou utilisées de quelque manière que ce soit sans l'autorisation
écrite de Verlinde S.A.S. Copyright 2020 © Verlinde S.A.S. Tous droits réservés.
IQ BFK457-06
COMPACT
190V DC 20W
Nr: 13319905 2.8NM DD.MM.YY
max@ 20°C ;
xx.x mm
MANUEL DU PROPRIÉTAIRE
4/2020