Sygonix 2299890 Notice D'emploi page 6

an alarm system). The code lock must be powered with a 9-24 V/
DC power supply.
For safety and approval purposes, do not rebuild and/or modify
this product. Using the product for purposes other than those
described above may damage the product. In addition, improper
use can cause hazards such as a short circuit, fire or electric
shock. Read the operating instructions carefully and store them
in a safe place. Only make this product available to third parties
together with its operating instructions.
All company and product names contained herein are trademarks
of their respective owners. All rights reserved.
Package contents
• Transponder code lock (reads RFID cards for authorization)
• Remote control with 1x CR2025 battery
• 1x diode
• 2x screws
• 2x dowels
• 1x hex key
• 1x "Master Add Card" master transponder
• 1x "Master Delete Card" master transponder
• Programming overview
• User manual
6