Brake Light Switch Adjustment - Yamaha RHINO 660 YXR660FAT Manuel Du Propriétaire

1. Brake light switch
1. Contacteur de feu stop
1. Interruptor de la luz de freno
2. Adjusting nut
2. Écrou de réglage
2. Tuerca de ajuste

Brake light switch adjustment

The brake light switch, which is activated by the
brake pedal, is properly adjusted when the brake
light comes on just before braking takes effect. If
necessary, adjust the brake light switch as follows.
1. Open the hood. (See pages 8-17–8-19 for
hood opening and closing procedures.)
2. Turn the adjusting nut while holding the brake
light switch in place. To make the brake light
come on earlier, turn the adjusting nut in di-
rection a. To make the brake light come on
later, turn the adjusting nut in direction b.
3. Close the hood.
8-97
EVU00880