Final Gear Oil - Yamaha RHINO 660 YXR660FAT Manuel Du Propriétaire

1. Final gear oil filler bolt
3. Proper oil level
1. Vis de remplissage de l'huile de couple conique arrière
2. Huile de couple conique arrière
3. Niveau d'huile correct
1. Perno de llenado de aceite del engranaje final
2. Aceite del engranaje final
3. Nivel correcto de aceite

2. Final gear oil

Final gear oil
Checking the final gear oil level
1. Place the vehicle on a level surface.
2. Remove the oil filler bolt, and then check the
oil level in the final gear case.
NOTE:
_
The oil level should be at the brim of the filler hole.
_
3. If the oil is below the brim of the filler hole,
add sufficient oil of the recommended type to
raise it to the correct level.
CAUTION:
_
Be sure no foreign material enters the final
gear case.
_
4. Install the oil filler bolt, and then tighten it to
the specified torque.
Tightening torque:
Final gear oil filler bolt:
23 Nm (2.3 m·kgf, 16 ft·lbf)
8-35
EVU00710