Yamaha RHINO 660 YXR660FAT Manuel Du Propriétaire page 266

1. Engine oil drain bolt
1. Vis de vidange d'huile moteur
1. Perno de vaciado del aceite del motor
1. Oil filter cartridge
1. Cartouche de filtre à huile
1. Cartucho del filtro de aceite 2. Llave para filtros de aceite
2. Oil filter wrench
2. Clé pour filtre à huile
To change the engine oil (with or without oil fil-
ter cartridge replacement)
1. Remove the console. (See page 8-21 for
console removal and installation proce-
dures.)
2. Start the engine, warm it up for several min-
utes, and then turn it off.
3. Place an oil pan under the engine to collect
the used oil, and then remove the engine oil
filler cap.
4. Remove the engine oil drain bolt to drain the
oil from the crankcase.
NOTE:
_
Skip steps 5–7 if the oil filter cartridge is not being
replaced.
_
5. Remove the oil filter cartridge with an oil filter
wrench.
NOTE:
_
An oil filter wrench is available at a nearby
Yamaha dealer.
_
8-27