Yamaha RHINO 660 YXR660FAT Manuel Du Propriétaire page 76

1. Speedometer
3. "M" button
5. Odometer/Tripmeter A/Tripmeter B
6. "TRIP/ODO" button
1. Compteur de vitesse
3. Bouton "M"
5. Compteur kilométrique/totalisateur journalier A/
totalisateur journalier B
6. Bouton "TRIP/ODO"
7. Bouton de la montre/du temps "
1. Velocímetro
3. Botón "M"
5. Cuentakilómetros/Cuentakilómetros parcial A/
Cuentakilómetros parcial B
6. Botón "TRIP/ODO"
7. Botón Reloj/Cuentahoras "
2. "H" button
4. Clock/Hour meter
7. Clock/Hour button " "/"
2. Bouton "H"
4. Montre/compteur horaire
"/" "
2. Botón "H"
4. Reloj/Cuentahoras
"/" "
Odometer and tripmeter modes
Pushing the "TRIP/ODO" button switches the dis-
play between the odometer mode "ODO" and the
tripmeter modes "A" and "B" in the following order:
ODO→TRIP A→TRIP B→ODO
To reset a tripmeter, select it by pushing the "TRIP/
ODO" button, and then push the "TRIP/ODO" but-
ton for at least three seconds. The tripmeters can
be used to estimate the distance that can be trav-
eled with a full tank of fuel. This information will en-
able you to plan future fuel stops.
"
NOTE:
_
Holding in the "TRIP/ODO" button and then turning
the key to "ON" switches the display between
"mph" and "km/h".
_
4-15