Child Lock - ETNA T311FZT Mode D'emploi

OPERATION

Child lock

EN 16
• Set the power level using the - and + buttons from the back zone.
▷ You can connect the connected zone to a timer; in this case you
will also see a timer symbol in the display.
De-activating the connection function.
• Press the connection button again.
The connection indicator and the connection symbol will disappear
from the display. The cooking zones are set to "0".
Your induction hob is fitted with a child lock, so that you can lock the
appliance to clean it or to prevent that it is switched on by children by
accident.
Setting the child lock
The lock function can be activated in all functions.
• To activate the child lock, press the timer - and + buttons at the
same time and hold for 3 seconds.
The child lock symbol appears in the display. You will hear a single
beep.
• To de-activate the child lock, press the timer - and + buttons at the
same time and again hold for 3 seconds.
The child lock symbol disappears from the display.
Locked cooking zone in operation
• On the display, the child lock symbol and the relevant cooking
zone's power level are shown alternately. When you use a button
for the activated cooking zone, the symbol above the timer - and +
buttons will light for a few seconds. For safety reasons you can still
turn off the cooking zone using the on/off button.
Tip
Activate the child lock before cleaning the hob, so that you don't switch
the hob on accidentally.