Child Lock; Residual Heat Indicator; Boost And Super Power Boost - ETNA T380ZT Mode D'emploi

OPERATION

Child lock

Residual heat indicator

Boost and Super Power Boost

Child lock activated
• Press the On/Off button (A).
The hob is in stand-by mode. The cooking zone displays will display
a '0'.
• Press simultaneously for a minimum of three seconds the RL
cooking zone button (C) and the – button (E) until you hear a beep.
For a few seconds the cooking zone display will show 'L'. The child
lock is activated.
Child lock deactivated
• Press the On/Off button (A).
The cooking zone displays will display 'L' for a few seconds.
• Press simultaneously for a minimum of three seconds the RL
cooking zone button (C) and the – button (E).
The cooking zone display will display 'L'. The child lock is
de-activated.
Tip
Set the hob to child lock mode before starting to clean the hob. This
will prevent you switching on the hob by accident.
After intensive use, the cooking zone used may stay hot for several
minutes. As long as the cooking zone is still hot an "H" will flash in the
display.
The cooking zones rear left and right and front right are equipped with
a 'boost' function. With the 'boost' function you can cook at the highest
power level for a maximum of 1.5 hours. The cooking zone will switche
off automatically once the maximum boost time has passed.
The front left cooking zone, with the 'P' symbol, is equipped with a
'Super Power Boost' function. With this function you can cook for a
short period - maximum 5 minutes - at extra high power level. After this
period the cooking zone automatically reduces to level 9.
EN 9