Switching Off; Child Lock - ETNA KI460ZT Mode D'emploi

OPERATION

Switching off

Child lock

Switching off one cooking zone
One cooking zone is switched on. The display shows a power level
between 1 and 9, or "P".
• Press the button (C) for the cooking zone to be switched off. Set
the cooking zone to '0' with the – button (E).
The cooking zone switches off
The hob switches off after 20 seconds, if all cooking zones are set
to '0' and no other process is being used.
Switching off all cooking zones
Several cooking zones are active.
• Press the On/Off button (A) to switch off all cooking zones.
You will hear a beep. All displays are off. The hob is switched off.
Child lock activated
• Press the On/Off button (A).
The hob is in stand-by mode. The cooking zone displays will display
a '0'.
• Press simultaneously for a minimum of three seconds the RL
cooking zone button (C) and the – button (E) until you hear a beep.
For a few seconds the cooking zone display will show 'L'. The child
lock is activated.
Child lock deactivated
• Press the On/Off button (A).
The cooking zone displays will display 'L' for a few seconds.
• Press simultaneously for a minimum of three seconds the RL
cooking zone button (C) and the – button (E).
The cooking zone display will display 'L'. The child lock is
de-activated.
Tip
Set the hob to child lock mode before starting to clean the hob.
This will prevent you switching on the hob by accident.
EN 13