Child Lock; Residual Heat Indicator - ETNA KIS060ZT Mode D'emploi

OPERATION

Child lock

Residual heat indicator

Child lock activated
• Press the On/Off button (A).
The hob is in stand-by mode. The cooking zone displays will display
a '0'.
• Press simultaneously for a minimum of three seconds the RL
cooking zone button (C) and the – button (E) until you hear a beep.
• Press again the RL cooking zone button (C).
For a few seconds the cooking zone display will show 'L'. The child
lock is activated.
Child lock deactivated
• Press the On/Off button (A).
The cooking zone displays will display 'L' for a few seconds.
• Press simultaneously for a minimum of three seconds the RL
cooking zone button (C) and the – button (E).
• Press again the - button (E).
The cooking zone display will display 'L'. The child lock is
de-activated.
Tip
Set the hob to child lock mode before starting to clean the hob. This
will prevent you switching on the hob by accident.
After intensive use, the cooking zone used may stay hot for several
minutes. As long as the cooking zone is still hot an "H" will flash in the
display.
EN 9