Using The (Child) Lock Function - ETNA KI390ZT Mode D'emploi

OPERATION

Using the (child) lock function

Child lock activated
1. Touch and hold the On/Off key until you hear an audio signal.
The hob is in stand-by mode.
▷
▷ The cooking zone displays show zero (0).
2. Touch simultaneously for a minimum of three seconds the rear left cooking zone plus (+) key
and the minus (-) key until you hear a audio signal.
▷ The cooking zone displays show flashing symbols (L) for a few seconds.
The child lock is activated.
▷
Child lock deactivated
1. Touch and hold the On/Off key until you hear an audio signal.
The cooking zone displays show flashing symbols (L) for a few seconds.
▷
2. Touch simultaneously for a minimum of three seconds the rear left cooking zone plus (+) key
and the minus (-) key until you hear a audio signal.
The cooking zone display will show zero (0).
▷
The child lock is de-activated.
▷
Set the hob to child lock mode before starting to clean the hob.
This will prevent you switching on the hob by accident.
EN 16