Making Printouts With The Desired User Set Number - Sony UP-55MD Mode D'emploi

If the printer does not print
While an error message is displayed on the video
monitor screen and printer window display.
Proceed as described in "Error/Warning Messages" on
page 67.
To make a printout at high speed
You can select the speed using the PRN SPEED item on
the PRINTER SETUP menu.
When you want to
Make a printout at normal speed.
Make a printout at high speed.
For detailed information on how to operate the menu,
see "Basic Menu Operations" on page 49.
When you want to see an image that is hidden
below a screen message
You can erase screen messages (such as Q1, A and so
on) from the video monitor screen by pressing the
DISPLAY button. The screen message disappears. To
display a screen message, press the DISPLAY button
again. (See "Erasing the Screen Display on the Video
Monitor" on page 43.) You can also erase the
information about ink ribbon and paper. (See
"Displaying the Remaining Amount of the Ink Ribbon"
on page 62.)
If a black line appears on the printout
Sometimes, a black line appears on the printout,
although it does not appear on the video monitor. This
black line can be eliminated from the printout. (See
"When a Black Frame or Lines Show up on the
Printouts" on page 56.)
If the color quality of the printouts is not
satisfactory
You can obtain satisfactory color quality of the printouts
by compensating for the input signal and/or adjusting
the color quality of the printouts. (See "Compensating
for the Input Signals" on page 52 and "Adjusting the
Printout Color" on page 53.)
When you load a new ink ribbon and paper, the color
balance may change due to differences caused by the
new pair of ink ribbon and paper in the new printing
pack. It is recommended that you adjust the color
balance each time you load a new ink ribbon and paper.
("Adjusting the Color Balance" on page 57.)
When storing your printouts:
• Avoid storing the printout in a location subject to high
temperatures, high humidity, excessive dust or direct
sunlight.
• Do not stick tape on a printout. Also, avoid leaving a
plastic eraser on a printout or placing a printout in
contact with materials which contain plasticizer
(under a desk mat, for example).
24
Making Full-Size Image Printouts
• Do not allow alcohol or other volatile organic solvents
to come into contact with the printouts.
Making Printouts with the Desired
User Set Number
You can register all the printer settings as a user settings.
The printer allows you to register three sets of settings as
User Set 1, 2 and 3. (See "Registering a User Set" on
page 62.) By selecting a desired user set number, the
PRN SPEED
printer functions according to the corresponding
NORMAL
settings. You can change a part of the selected user
HIGH
settings and make printouts.
The following two methods are available to select the
desired user set number:
• Using the LOAD USER button
• Using the menu
To select the desired user set number by using
the LOAD USER button
1
3
1, 2
2
Press the LOAD USER button.
The currently selected user set number appears.
User name of the
currently selected
Currently selected user
user set number
set number is lit in
green.
4 5