Product Specifications; Monitor Specifications; Battery Specifications - Verathon GlideScope Go Manuel D'utilisation Et De Maintenance

PRODUCT SPECIFICATIONS

MONITOR SPECIFICATIONS

For video laryngoscope specifications, please see the GlideScope Video Laryngoscopes
Operations & Maintenance Manual (part number 0900‑4940) which is available at
verathon.com/product‑documentation.
Table 2. System Specifications
Classification:
Ingress protection against water:
Expected product life:
Height
Width
Depth
Weight (approximate)
LCD:
Frames per second:
Operating temperature:
Charging temperature:
Relative humidity (non‑condensing): 0–95%
Atmospheric pressure:
Temperature:
Relative humidity
(non‑condensing):
Atmospheric pressure:

BATTERY SPECIFICATIONS

Table 3. Battery Specifications
Condition
Battery type:
Battery life:
Charging time:
Rated capacity:
Nominal voltage:
Max charging voltage:
General Specifications
Electrical Class II / Internally Powered, Applied Part BF
IP67
1500 uses or 3 years
Monitor Component Specifications
86 mm (3.39 in)
98 mm (3.86 in)
47 mm (1.85 in)
0.25 kg (8.82 oz)
320 x 240 px, 8.9 cm (3.5 in)
30 (displayed and recorded)
Operating & Storage Specifications
Operating Conditions
10–40°C (50–104°F)
10–35°C (50–95°F)
700–1060 hPa
Shipping & Storage Conditions
‑20–40°C (‑4–104°F)
10–95%
700–1060 hPa
Lithium‑ion
Under normal operating conditions, a fully charged, new battery
lasts approximately 100 minutes, (5) intubations without recording.
Charging time off line will take no more than 3 hours from an
empty battery to a full charge.
1200 mAh or higher
3.7 V
4.2 V
Description
19
0900‑4788 REV‑10