General Instructions - BIANCHI VENDING LEI700 Plus 2Cups Manuel D'emploi Et D'entretien

1.0 TECHNICAL CHARACTERISTICS (FIG. 1.1)
Height (A) mm
Width (B) mm
Depth (C) mm
- *(Touch version)
Weight
Power Supply
Electrical supply connec.
Water supply connection
WATER SUPPLY
from mains supply with pressure range 0.05 to 0.65 MPa (0.5-6.5 bar)
The voltage values of the various models are shown on the rating plate inside
the vending machines
PRODUCT CONTAINER CAPACITY
Coffee in beans
Double grinder
Instant coffee
Barley
Powder milk
Creamer
Chocolate
Tea
Frozen-dry tea
Broth
Cold drink
Sugar
* In the double-bell versions, the decaffeinated box contains 0.34 kg
The electrical characteristics of the models are outlined on the
rating plates outside the vending machines.
KNOWING THE DISTRIBUTOR
1. Coffee assembly and coffee grinder
2. Drink-dispensing assembly
3. Sugar-dispensing assembly
4. Payment system compartment
5. 25-cl cup column
6. Standard cup column
7. CPU board
8. Power board
9. Stirrer column
10. Liquid coffee ground bin
11. Dispensing compartment
12. Service button
13. Washing button
14. Extractable arm
15. Motorised door
Instructions
for the user
Lei700 Plus 2 cups
1830
665
990 - *(1015)
214
220-230V - 50Hz 60Hz
Schuko plug
3/4" gas
3,8 - 4,5 Kg
Kg 3,5 (x2)
Kg 1,4*
Kg 1,4
Kg 2,2
Kg 4,0
Kg 4,8
Kg 5,2
Kg 2,4
Kg 3,8
Kg 4,0
Kg 5,2
(Fig.1.2)
2.0 PREMISE
2.1 - Important notices for operator
This automatic distributor has been designed and constructed in full accor-
dance with current safety regulations and is therefore safe for those who
follow the ordinary filling and cleaning instructions as indicated in this manual.
The user must not under any circumstances remove the guards that
require a tool for removal.
Some maintenance operations (to be done solely by specialized technicians
and indicated in this manual with a special symbol) require that specific
safety protections of the machine must be switched off .
In accordance with the current safety regulations, certain operations are
the exclusive responsibility of the installation technician, and the ordinary
maintenance technician may have access to specific operations on with
specific authorization.
The acquaintance and absolute respect, from a technical point of view, of
the safety instructions and of the danger notices contained in this manual,
are fundamental for the execution, in conditions of minimum risk, for the
installation, use and maintenance of this machine.
2.2

General Instructions

Knowledge of the information and instructions contained in the
present manual is essential for a correct use of the automatic
vending machine on the part of the user .
– Interventions by the user on the automatic vending machine are allowed
only if they are of his competence and if he has been duly trained.
The installation technician must be fully acquainted with all the mecha-
nisms necessary for the correct operation of the machine.
– It is the buyer's responsibility to ascertain that the users have been trained
and are informed and regulations indicated in the technical documentation
supplied.
Despite the full observance of the safety regulations by the constructor,
those who operate on the automatic dispensers must be fully aware of
the potential risks involved in operations on the machine.
– This manual is an integral part of the equipment and as such must always
remain inside of the same, so as to allow further consultations on the
part of the various operators, until the dismantlement and/or scrapping
of the machine.
– In case of loss or damage of the present manual it is possible receive a
new copy making application to the manufacturer, with prior indication
of the data registered on machines' serial number.
– The functional reliability and
guaranteed only if original parts are used.
– Modifications to the machine not previously agreed on with the construction
company and undertaken by the installation technician and/or manager,
are considered to be under his entire responsibility.
All the operations necessary to maintain the machine's efficiency, before
and during it's use are at the users charge.
– Any manipulations or modifications made to the machine that are not
previously authorized by the manufacturer, relieve the latter from any
responsibility for damages deriving from, and will automatically result
in the cancellation of the machine guarantee terms.
– This manual reflects the status at the moment of the emission of the
automatic vending machine on the market; possible modifications, upgra-
ding, adaptments that are done the machine and that are subsequently
commercialized do not oblige Bianchi Industry neither to intervene
on the machine previously supplied, nor, neither to update the relative
technical documentation supplied together with the machine.
– It is however Bianchi Industry faculty, when deemed opportune and
for valid motives, to adjourn the manuals already present on the market,
sending to their customers adjournment sheets that must be kept in the
original manual.
17
ENGLISH
optimization of machine's services are