Indicators; Equipment Maintenance And Repairs; Overview; Equipment Maintenance - Cristec YPOWER Série Manuel Utilisateur

3.3.15 Indicators

The following led indicators are visible on the front of the appliance for monitoring.
INDICATORS
Green LED 1 "ON"
Orange LED 2
"BOOST/ABSORPTION"
Green LED 2
"FLOATING/REFRESH"
4

EQUIPMENT MAINTENANCE AND REPAIRS

4.1 O
VERVIEW
This paragraph deals with equipment maintenance and repairs. Proper operation of the product and its service life are
dependent on strict compliance with the following recommendations.
4.2 E
QUIPMENT MAINTENANCE
Disconnect the battery charger from the DC network and the batteries before starting any maintenance work.
If appliances are in a dusty atmosphere, vacuum-clean them regularly, since dust deposits may adversely affect heat
dissipation.
Check the state of battery charge every 3 months.
Nuts and screws should be tightened annually to ensure efficient operation of the appliance (particularly in rugged
conditions: vibrations, shocks, high variations in temperature etc.).
STATE
On
Off
Flashing (1 sec. ON, 1 sec. OFF)
On fixed
On fixed
Flashing (1 sec. ON, 1 sec. OFF)
Off
MEANING
Charger input is ON
No or poor quality DC current
Input fuse is blown
Internal charger malfunction
Charger in BOOST phase
(switch E = '1')
Charger in ABSORPTION phase
(switch E = '1')
Charger in FLOATING phase
Charger in REFRESH phase
(switch F = '1')
Internal charger malfunction or output fuse
blown
38