Output Current Limitation - Cristec YPOWER Série Manuel Utilisateur

REFRESH phase :
It is an automatic weekly cycle (Inhibited or not by means of switch F) in order to optimize the battery life duration.
It will occur only after a complete recharge cycle (BOOST, ABSORPTION and FLOATING).The charger will generate
automatically a safe timed voltage step every 7 days whatever the position of BOOST switch.
Phase REBOOST :
Automatic phase consisting in coming back to a BOOST voltage if the DC utilizations require it (i.e. after a complete
recharge cycle BOOST, ABSORPTION and FLOATING if a some DC constant consumptions are detected the charger will
restart a new complete charge cycle including a BOOST phase).
This REBOOST phase will be authorized after measuring certain battery voltage during a determined time.
BOOST in OFF position
With this setting, the YPOWER charger produces a single-stage UI type charge curve. It generates a constant voltage,
supplying the current required by the battery(ies). Recharging time depends on the state of the battery, being longer
than when the BOOST is in the ON position.

3.3.14 Output current limitation

In order to protect the output power, the YPOWER charger has an output current limitation according to the output
voltage.
Output Current
Iout = Nominal curent
10% of Nominal
Output current
Output Voltage
42% of Nominal output 83% of Nominal output
voltage voltage
37