Publicité
EN
Routine Maintenance
Robot Sensors
Wipe the robot sensors by using a soft and dry cloth, as shown
in the below figure:
Bumper Window
3D Dual-Line Laser
VersaLift Sensor
Sensors
Edge Sensor
Bumper
Cliff Sensors
Carpet Sensor
Note: A wet cloth can damage sensitive elements within the robot and
the base station. Please use a dry cloth for cleaning.
35
Charging Contacts and Signaling Area
Clean the charging contacts and the signaling area with a soft
and dry cloth.
Auto-empty Vents
Clean the auto-empty vents of the robot and the base station
with a soft and dry cloth.
Routine Maintenance
Mop Pads
Remove the mop pads from the mop pad holders to replace
them.
Battery
The robot contains a high-performance lithium-ion battery
pack. Make sure that the battery remains well-charged for
daily use to maintain optimal battery performance. If the robot
is not used for an extended period of time, turn it off and put it
away. To prevent damage from over-discharging, charge the
robot at least once every three months.
EN
36
Publicité
