Publicité
EN
Routine Maintenance
Side Brush
Unscrew the side brush with a screwdriver, clean the hair from
the brush, and then screw it back on.
Mop Pad Holders
Remove and clean the mop pad holders.
33
Omnidirectional Wheel
Note:
·
Use a tool such as a small screwdriver to separate the axle and tire of
the omnidirectional wheel. Do not use excessive force.
·
Rinse the omnidirectional wheel under the running water and put it
back after drying it completely.
Routine Maintenance
Dust Box and Filter
1. Remove the robot cover and press the dust box clip to
remove the dust box.
2. Remove the dust box filter, and then empty the dust box.
3. Gently tap the basket of the filter to remove the dirt.
Note: Do not attempt to clean the filter with a brush, a finger or sharp
objects to prevent damage.
4. Rinse the dust box and filter with water and dry them
completely before reinstalling.
24h
Note:
· Rinse the dust box and filter with clean water only. Do not use any
detergent.
· Use the dust box and filter only when they are completely dry.
EN
34
Publicité
