Publicité
EN
Installation Instructions
④ Tidy Up the Water Pipes and Wires
1. Clamp the water pipes and wires with wire organizer .
Wire Organizer
2. Thread the bottom of the wire organizer into the spiral cable
wrap.
Spiral Cable Wrap
25
3. Pull the wire organizer backward to wrap the water pipes and
wires.
Wire Organizer
Test the Installation Effect
Test Method
1. Before testing, please power up the base station and then
open the main water valve and angle valve at home.
2. Refer to the user manual to download and set up the app.
After installing, a pop-up prompt will appear in the app,
please complete the test steps according to the instructions.
3. Replug the base station and test again whether the base
station can perform auto water refilling and draining
properly.
Note: Please follow the instructions based on the latest app version.
EN
Cancel
Start testing
INSTALLATION COMPLETED
26
Publicité
