Publicité
EN
Routine Maintenance
Parts
To keep the robot in good condition, it is recommended to refer to the accessory usage in the app or the following table for routine
maintenance.
Part
Maintenance Frequency
Replacement Period
Main brushes
Every 6 to12 months
Dust box's filter
Every 3 to 6 months
Once every 2 weeks
Side brush
Mop pad holders
/
Washboard filter
Once every 1 to 2 months
Base station's
signaling area
Charging contacts
Auto-empty vents
/
Caster wheel
Once every month
Omnidirectional
wheel
Edge sensor
VersaLift sensor
29
Maintenance
Replacement
Part
Frequency
Period
3D dual-line laser
sensors
Bumper window
Carpet sensor
Once every month
Cliff sensors
Bumper
/
Robot's automatic
water refilling inlet
Bottom of the robot
Dust box
Main wheels
Clean it as needed
Clearance legs
Every 2 to 4
Dust bag
months
/
Every 1 to 3
Mop pads
months
Note:
The frequency of maintenance and replacement depends on
actual usage. If an exception occurs due to special circumstances,
prompt maintenance or replacement is recommended.
Routine Maintenance
Washboard Filter
1. After the mop pad cleaning is complete, take out the robot
and press the washboard base clips to remove the washboard
filter.
Washboard
Washboard
base clip
base clip
2. Remove and rinse the washboard filter with clean water, and
wipe it clean.
3. Reinstall the washboard filter first, and then the washboard
base.
Water Status
Water Status
Sensor
Sensor
Note:
· If there are water stains remaining on the water status sensors, be
sure to wipe them with a soft and dry cloth before reinstalling the
washboard base.
· When reinstalling the washboard base, make sure that the clips at
both ends are firmly in place after you hear a click.
4. Use the app or press the button
to return the robot to the
base station, or manually put the robot back.
EN
30
Publicité
