PRESSURE COOKER
20
Steam and liquid leak
from the safety valve
suddenly.
Steam and liquid leak
from the releasing hole
of second safety valve
suddenly.
CLEANING AND MAINTENANCE
Please clean the pressure cooker, add water to the pot and heat half an hour before first time
using, in order to remove unpleasant odors.
Maintenance of the cooker body
•
Clear away the dirt.
•
Then wipe off the water and keep the cooker dry.
•
Don't scrape the cooker surface with hard material such as metal to avoid abrasion.
•
Don't touch the cooker with other kinds of metal to avoid electro chemical corrosion.
•
Don't store food inside the cooker for a long time.
Maintenance of the sealing ring (fig. 15):
•
Remove the sealing ring from the lid. Clear away the dirt from the ring and the lid with hot
water or cleaning agents.
•
Wipe off the water and keep the sealing ring dry.
•
Put the sealing ring back to the lid. Not use the cooker to avoid the sealing ring being
squeezed (Separate the sealing ring from the cooker lid and the cooker body).
Maintenance of the safely open-preventing valve, the pressure regulator and the steam-releasing
hole.
Check the releasing hole of the pressure regulator and the safely open-preventing valve. If they
1. The pressure regulator
is obstructed, while the
safety function of the
safety valve is working.
1. The pressure regulator
is obstructed.
2. The safety valve has
lost its function.
1. Take the pressure cooker away from
the fire. After it has cooled down, put the
pressure regulator down and clean the
releasing hole.
1. Take the pressure cooker away from
the fire. After it has cooled down, put the
pressure regulator down and clean the
releasing hole.
2. Replace the safely open-preventing
valve.
Fig.15