EC Declaration of Conformity
No. (S-No.): 28553
according to EC directive: 2006/42/EG
We,
Altrad Lescha Atika GmbH
Josef-Drexler-Str. 8, 89331 Burgau - Germany
herewith declare under our sole responsibility that the
product
Kettensäge (Chain saw) type KS 1800/35-2
Serial number.: 000001 – 020000
is conform with the above mentioned EC directives as well as
with the provisions of the guidelines below:
2000/14/EC, 2014/30/EU and 2011/65/EC.
Conformity assessment procedure: 2000/14/EC –
Appendix V
Measured sound power level L
Guaranteed sound power level L
Following harmonized standards have been applied:
EN 60745-1:2009/A11:2010, EN 60745-2-13:2009/A1:2010
EN 55014-1:2017, EN 55014-2:2015
EN 61000-3-2:2014; EN 61000-3-11:2000
Duly authorised person for the complilation of technical
documents:
Altrad Lescha Atika GmbH - Technical department
Josef-Drexler-Str. 8 – 89331 Burgau - Germany
i.A.
Burgau, 11.01.2022
i.A. G. Koppenstein
Engineering design management
Symbols on the chain saw
Memorise the meaning of the symbols to be able to operate the
device more safely and to protect yourself and other from
possible injuries.
Warning! This chain saw may cause serious
injury.
Carefully read operator
instructions before starting the machine and
observe the instructions when operating.
Switch off the motor and disconnect the mains
plug before performing cleaning, maintenance or
repair work.
Sofort
Netzstecker
Anschlussleitung beschädigt oder durchtrennt
wird.
Wear hard hat.
Wear safety glasses.
104,2 dB (A).
WA
107 dB (A).
WA
s manual and the safety
'
ziehen,
wenn
Wear hearing protection.
Wear protective gloves.
Wear safety shoes.
Wear cut-proof protective clothing.
Always hold the chain saw with both hands when
working with it.
Risk by kickback! Do not saw with the guide bar
tip.
Do not expose to rain. Protect against humidity
Danger – objects may be thrown out at high
speed.
Keep bystanders as well as pets and domestic
animals away from the danger zone.
Guaranteed sound power level L
measured according to regulation 2000/14/EC
Machine of the protection class II
(double insulation)
This product complies with European regulations
specifically applicable to it.
Electrical devices do not go into the domestic
rubbish. Give devices, accessories and packaging
to an ecofriendly recycling.
Old appliances can be handed in at a collection
die
point that carries out disposal in accordance with
the Recycling Act, e.g. at your local building/
recycling yard.
According to the European Directive 2012/19/EU on electrical
and electronic scrap, electrical devices that are no longer
serviceable must be separately collected and brought to a
facility for an environmentally compatible recycling.
Chain brake disabled - OFF
Chain brake enabled - ON
Mind the running direction of the chain links
Length of the guide bar.
Max. cutting length
WA
107 dB (A).,
17