Danger Of Electric Shock; Avoiding Damage To Material, Property And The Device - DS Produkte HM01-108Q Mode D'emploi

■ Pregnant women should not use the device or should use it only after consultation
with their doctor.
■ Start on the slowest vibration level and increase the intensity only gradually. We
explicitly point out that improper use of the device and excessive use can be detri-
mental to your health.
■ CAUTION! Stop using the device immediately if you suddenly feel weak or dizzy. If
you feel sick, have pain in your chest or arms, an irregular heartbeat, shortness of
breath or other unusual symptoms, seek medical attention immediately.

Danger of Electric Shock

■ Use the device only in closed rooms.
■ The device should only be connected to a properly installed plug socket with safety
contacts. The plug socket must also be readily accessible after connection. The
mains voltage must match the technical data for the device (see the „Technical Data"
chapter). Only use suitable extension cables whose technical data is the same as
that of the device.
■ Never immerse the device in water or other liquids! Ensure that the device, cable
and plug do not fall into water or become wet. Should the device fall into water,
switch off the power supply immediately.
■ Never touch the device, the cable or the plug with wet hands.
■ Remove the mains plug from the plug socket if a fault occurs while the device is in
operation or when there is a thunderstorm.
■ When you want to remove the mains plug from the socket, always pull the plug and
never the cable.
■ Always check the device for damage before putting it into operation. If the device,
the cable or the plug shows visible signs of damage, the device must not be used.
Do not use the device if it has malfunctioned or been dropped.

Avoiding Damage to Material, Property and the Device

■ Read through the assembly instructions carefully before assembling the device. The
sequence of working steps described must be followed exactly.
■ Always place the device on a dry, even and fi rm surface.
■ Protect fl oor coverings on which the device is placed (both during set-up and during
use) with an underlay.
■ Each time before you start using the device, make sure that there is suffi cient clear-
ance around the device so that you cannot bump into walls, furniture etc. during use.
■ Do not expose the device to extreme temperatures, strong temperature fl uctuations,
direct sunlight or moisture.
■ Maintain a suffi cient distance from heat sources such as radiators, fi replaces or
ovens in order not to damage the device.
■ Position the cable in such a way that it does not become squashed or bent and does
not come into contact with hot surfaces.
■ Only use accessories supplied with the device by the manufacturer.
■ Do not drop the device or allow it to be knocked violently.
■ Use the device only when it is fully assembled and in working order.
08602_DE-EN-FR-NL_A5_V5.indb 17 08602_DE-EN-FR-NL_A5_V5.indb 17
17 EN
27.04.2016 10:50:41 27.04.2016 10:50:41