Publicité
• Dispose of remaining fuel in an environmentally
compatible manner.
• Operate the engine until the carburettor is empty.
Transport
To transport the device stop the engine and wait until
the cutting device does not longer move. Attach the
protective cover.
Carry the device with the front handle.
When transporting the device within a car put it in
the boot or on a separate loading area. Secure the
hedge trimmer against tipping over, damages and
fuel spillage.
13. Troubleshooting
Fault
Hedge trimmer does not
work.
Hedge trimmer cuts with
interruptions
Engine is running, cutting
device does not move
Cutting device gets hot
Possible cause
• No fuel supply
• Fault in the fuel line
• Fuel filter clogged
• Spark plug defective
• Carburettor defective
• Internal fault.
• Internal fault.
• ON / OFF switch defective.
• Cutting device blocked
• Internal fault.
• Clutch defective
• Missing lubrication => friction
• Not enough play
• Cutting blades are blunt
www.scheppach.com
12. Disposal and recycling
Notes for packaging
The packaging materials are
recyclable. Please dispose of
packaging in an environmen-
tally friendly manner.
You can find out how to dispose of the disused
device from your local authority or city adminis-
tration.
Fuels and oils
• Before disposing of the unit, the fuel tank and the
engine oil tank must be emptied!
• Fuel and engine oil do not belong in household
waste or drains, but must be collected or disposed
of separately!
• Empty oil and fuel tanks must be disposed of in
an environmentally friendly manner.
Remedy
• Check the fuel quantity
• Check the fuel line for kinks or damages
• Clean/replace the fuel filter
• Replace the spark plug
• Manufacturer or responsible customer service
must be called
• Manufacturer or responsible customer service
must be called
• Manufacturer or responsible customer service
must be called
• Manufacturer or responsible customer service
must be called
• Remove object
• Manufacturer or responsible customer service
must be called
• Manufacturer or responsible customer service
must be called
• Oil the cutting device
• Adjust the sliding play
• Have the cutting device sharpened
GB | 27
Publicité
