Dentsply Sirona Midwest Stylus Plus Manuel D'utilisation page 59

Instructions for Use
A
66 07 290 D3673.201.01.08.02
8.3.3 Replacing the halogen lamp/LED
CAUTION! The lamp can be hot. Risk of burns! Allow the lamp to
cool down.
1. Remove the high-speed handpiece.
B
2. Unscrew the cap (B).
3. Remove the defective halogen lamp/LED (A).
4. Insert the new halogen lamp/LED. Ensure the proper position of
the contact surfaces.
NOTICE! Pressing on the lens can destroy the LED. Use the
assembly tool (C) to insert the LED.
C
5. Wipe the bulb of the halogen lamp with a clean cloth.
6.
Unscrew the cap from the quick coupling.
7. Check the light function of the quick coupling.
If the LED does not light up:
➢ Remove the LED and re-insert it after rotating it 180° around its
own axis.
8 Maintenance
57