Dentsply Sirona Midwest Stylus Plus Manuel D'utilisation page 50

7 Reprocessing
48
7.2.5 Cleaning the fiber optic surfaces
Interval
● Check and clean if needed
Procedure
ü
The high-speed handpiece is cleaned and lubricated.
ü
A Q-tip/cloth and alcohol are available.
A
1. In order to avoid scratching the surfaces, blow off any dirt
particles with air from a dry syringe.
2.
Wipe the surfaces with a Q-tip or a soft cloth and alcohol.
Instructions for Use
66 07 290 D3673.201.01.08.02