Dentsply Sirona Midwest Stylus Plus Manuel D'utilisation page 56

8 Maintenance
54
8.2 Check the FG clamping system without a chuck tester
Interval
● at least once a month
Required accessories
● Large head diamond bur
Procedure
ü You wear suitable protective gloves.
ü
A diamond bur with a large head is ready.
1. Insert a large head diamond bur into the FG clamping system.
2. Carefully pull on the bur (at least 5 lbs) and check to make sure
the bur stays in place.
3. If the bur moves or pulls out, do not use and send the instrument
in for service.
Tip: Record the time and result of the check for your own information.
Instructions for Use
66 07 290 D3673.201.01.08.02