Dentsply Sirona Midwest Stylus Plus Manuel D'utilisation page 48

7 Reprocessing
46
Procedure
ü The high-speed handpiece is cleaned.
1.
Press the high-speed handpiece head with the chuck firmly
against the spray can nozzle.
2. Spray the chuck for 1-2 seconds.
IMPORTANT: Hold the spray can upright.
3. Wipe away any spray that runs out with a clean, lint-free cloth.
4.
Repeat the process until the spray that runs out is clear.
5. Purge the instrument with compressed air (3 bar) for 10
seconds.
Instructions for Use
66 07 290 D3673.201.01.08.02