Dentsply Sirona Midwest Stylus Plus Manuel D'utilisation page 29

Instructions for Use
66 07 290 D3673.201.01.08.02
4 Preparation
4.1 Initial start-up and longer breaks in use
ü
The high-speed handpiece can reach full power only if specified
operating pressures are set [→ 18]. If necessary, have the
pressures checked by a service technician with a star tester that
is placed between the supply hose and the quick coupling.
➢ Sterilize the high-speed handpiece and accessory parts prior to
startup.
NOTICE! Never sterilize the quick coupling.
➢
Clean and lubricate the high-speed handpiece after longer
breaks in use.
4.2
Prior to starting the work day
➢
Purge the water and air channels for 30 seconds.
4 Preparation
27