Publicité
7
Storage
Possible correct storage when not in use:
•
Hang the lifting device hanging or
•
Store the lifting device vertically.
IMPORTANT Remove the suction plate and store it separately before disconnecting.
CAUTION
Storage recommendation for elastomer parts
The effects of ozone, light (especially UV), heat, oxygen, humidity as well as mechanical influences can
reduce the service life of rubber products. Rubber parts should therefore be stored in a cool place (0° C to +
15° C, max. 25° C) that is dark, dry, low in dust and offers protection from the weather, ozone and drafts.
They should also be free of tension (e.g. stacked appropriately to avoid deformation).
Make sure that there is no condensation inside the reservoir (sight glass item 18). Drain condensation if
necessary (see section 9.7).
18
36/44
Suction cup damage
suction cups become deformed, age prematurely and fall out.
Store the suction cups according to the storage recommendations for
►
elastomer parts.
Publicité
