Publicité
1.
Lower the load and put it down safely on an open, even area.
2.
Ensure that the load can not slide or tilt.
3.
Actuate operating element to lower (see figure above according to model).
The load is released. The lifting device can be lifted again.
Parking the lifting device
Setting down the lifting device briefly in the off state is referred to as 'parking'.
Procedure:
1.
Switch off the energy supply.
2.
Drain condensation if necessary (see section 9.7).
3.
Hang the lifting device in a safe position on the transportation or lifting device. Do not set it down on
the load.
35/44
Publicité
