Publicité
Saw blade height adjustment
Adjustment of the saw blade tilt
Adjust the riving knife and the saw blade guard to the position of the saw
blade!
Adjust the rip fence or the cross-cut fence so that it does not touch the inclined
saw blade.
Scoring saw blade basic adjustment
Scoring saw blade height adjustment
Adjustment of the cutting width at rip fence
HOLZMANN Maschinen GmbH
Push the button saw blade height up (1) to lift the saw
blade upwards.
Push the button saw blade height down (2) to lower
the saw blade.
The height of the saw blade must be adjusted so that
the teeth hit the top of the work-piece.
Turn the hand wheel (1) clockwise to tilt the saw
blade. Turn the hand wheel counterclockwise to move
the saw blade in a vertical position again. The saw
blade can be tilted from 0° to 45°. The current position
can be seen on the display (2).
• Heihght of the scoring saw blade
• Lateral adjustment of the scoring saw blade
NOTE:
be adjusted so that it cuts a slot with a depth of
1.5 – 2 mm.
Push the button scoring saw blade height up (1) to lift
the scoring saw blade upwards
Push the button scoring saw blade height down (2) to
lower the scoring saw blade
The cutting width can be adjusted on the rip fence and
can be read off the ruler (1).
• Claming lever (2) in position A:
Rip fence locked
•
rip fence unlocked and moveable
• Claming lever (2) in position C:
Make fine adjustment using knurled screw (3)
www.holzmann-maschinen.at
N O TE
- Loosen screw (1)
- Turning the setting screw (2) to the left .
- Turning the setting screw (2) to the right .
- Fix screw (1)
- Turning the setting screw (3) to the left
- Turning the setting screw (3) to the right
When using the scoring blade, the height must
Claming lever (2) in position B:
ASSEMBLY
.
.
51
FKS400V32TOP_400V
Publicité
