Publicité
TRANSPORT
Risk of injury from suspended or unsecured load!
Damaged or insufficiently strong hoists and load slings can result in serious injury or
even death.
Transport the machine in its packaging to the installation site. To manoeuvre the machine in its
packaging, e.g. a crane, pallet truck or forklift with appropriate lifting capacity and a fork length of
at least 1200 mm can be used. The specifications can be found in the chapter Technical data. For
proper transport, observe the instructions and information on the transport packaging regarding
centre of gravity, lifting points, weight, means of transport to be used as well as the prescribed
transport position etc. Make sure that the selected lifting equipment (crane, forklift, lift truck, load
sling etc.) is in perfect condition. Only use tested transport and lifting devices that correspond to
the weight and dimensions of the machine!
ASSEMBLY
14.1
Preparation
Check delivery content
Check the delivery immediately for transport damage and missing parts. Report any damage or
missing parts to your dealer or the shipping company immediately. Visible transport damage must
also be noted immediately on the delivery note in accordance with the provisions of the warranty,
otherwise the goods are deemed to have been properly accepted.
Requirements for the installation site
The chosen installation site must have a suitable connection to the power supply and a connection
to an extraction system. Observe the safety requirements and the dimensions of the machine.
Place the machine on a level, solid surface that can support the weight of the machine. The chosen
installation site of the machine must comply with the local safety regulations as well as the
ergonomic requirements for a workplace with sufficient lighting conditions.
The floor at the installation site must be able to bear the load of the machine!
When dimensioning the required space, take into account that the operation, maintenance and
repair of the machine must be possible without restrictions at all times. Also take into account the
working areas of neighbouring machines.
HOLZMANN Maschinen GmbH
WAR N I N G
Before use, therefore, check hoists and load slings for adequate load-bearing
capacity and perfect condition.
Secure the loads carefully.
Never stand under suspended loads!
A: Transporting points for forklift
www.holzmann-maschinen.at
N O TE
TRANSPORT
44
FKS400V32TOP_400V
Publicité
