Publicité
The base of the machine has fixing holes by means of which the machine is firmly connected to
the floor. This improves the stability of the machine.
A
mm
4860
Preparation of the surfaces
Before putting the machine into operation, carefully remove the corrosion protection or grease
residues from the bare metal parts. This can be done with the usual solvents. Under no
circumstances should you use nitro thinners or other cleaning agents, as these can attack the
machine´s finish.
The use of paint thinners, petro, aggressive chemicals or scouring agents will damage
the surfaces!
Therefore: Use only mild cleaning agents!
14.2
Assemble
The machine and machine parts are heavy!
At least 2 people are required to set up the machine.
The machine has been disassembled for transport and must be reassembled before use.
HOLZMANN Maschinen GmbH
B
C
6850
1350
3030
www.holzmann-maschinen.at
D
E
F
2220
3200
N O TE
N O TE
ASSEMBLY
G
H
900
1345
40°
FKS400V32TOP_400V
I
45
Publicité
